Application and Contents
Application Methods:
- Dipping
For maximum amounts of adhesize and optinum filter performance, dipping of the filter in adhesize is generally recommended. After dipping, the filter can be drained preferably horizontaly to insure a more uniform distribution of the adhesize over the face of the filter.
- Spraying
Super Filter Coat may also be applied by spraying with a standard garden or paint spray gun. To obtain optimum filter performance and effective on both intake and exhaust side. Filter of 1/2" thickness or under require adhesive spraying on one side only.
Water Mixing Intructions Use a clean container with capacity greater then the amount of the finished solution. Fill container with the proper volume of water depending on the concentration required (see product data sheet). The ratio of adhesive to water can be varied depending on filter thickness and filtration application. Using soft water at 50 to 60°F ADD ADHESIVE SLOWLY TO WATER, preferably mixing with a high speed propeller type mixer.
| Contents |
| | RP-412 | RP-418 | RP-419 | RP-421 |
| Soluble Hydrocarbon oil | 44% | 58% | 58% | 58% |
| Anit-Microbial Agent | <1% | 0.4% | 0.4% | 0.4% |
| Polyethelene Thickener | <1% | 1.2% | 1.2% | 1.2% |
| Water | 55% | 40% | 40% | 40% |
[ITEMPRICE]