Colder Products PLCD29004 quick disconnect coupling. Ideal for disconnecting a water filter or humidifier running hot or cold water.
This coupling connects with all the Colder Products female couplings that we offer. This coupling has a John Guest SpeedFit® fitting for 1/4" tubing. SpeedFit® fittings are push-in connections for plastic or copper tubing (see below).
All our couplings have an internal valve that automatically shuts off the water when disconnected. It is not necessary to shutoff the water supply when disconnecting these couplings. When disconnecting a water filter or humidifier, the water will not leak out of either end of the connection.
Cut the tubing square ensuring it is free of score marks. NOTE: DO NOT use a hacksaw. NOTE: To avoid damage to the O-Ring, make sure burrs and sharp edges are removed from the end of the tubing. With the fitting clean and the tubing cut square, insert the tubing in to the SpeedFit connector. The tubing can be removed by pushing in the collet. Removing and inserting the tubing many times will cause a connection failure. It will leave a burr on the tubing damaging the O-Ring and will wear down the stainless steel teeth.
The brand SpeedFit and John Guest are the registered trade-marks of John Guest International Limited. Colder Products purchases the SpeedFit components and technology.
Our Colder Products couplings require purchasing both a female coupling body, and a male coupling insert.
These components are sold individually. All the male coupling inserts connect with any of the female coupling bodies. The combinations are:
Manufacturer Colder Products Company manufactures many products specifically for the Food & Beverage marketplace. All of these products are listed under NSF/ANSI standard 169 and are made from FDA approved materials. Visit http://colder.com/nsf to learn more. Applications may include: water filtration, humidifiers, office coffee service, food service equipment, etc.
[ITEMPRICE]