PermaFlo Blue polyester non-woven synthetic media is a cost-effective and high-performance alternative to hogs hair filters and disposable pleated air filters due to its reduced initial resistance to air flow. Its air-lay web distributes fibers evenly, resulting in a consistent, high-strength, stiff, and long-lasting medium without the need for a metal frame.
Tests show stiff non woven polyester media effectively collects water and mist, keeping equipment dry without absorbing moisture or sagging in wet settings, according to independent UL-50 rain results.
PermaFlo Blue |
| Nominal Thickness |
.5" |
1.0" |
| MERV Rating |
MERV 5 |
MERV 6 |
Models/Roll Pad Sizes
|
PFLO-1/2-ROLL25 (25" X 48')
PFLO1/2-ROLL48 (48" X 48')
|
PFLO1-ROLL25 (25" X 36')
PFLO1-ROLL30 (30" X 36')
FLO1-ROLL36 (36" X 36')
PFLO-ROLL48 (48" X 36') |
Industries Served
Aerospace, Aftermarket Products, Computers, Electronics, Filter Banks, Food Service, HVACR, Ice Machines, Industrial Enclosures, Marine, Medical, Military, Portable Cooling, Power Generation, PTAC, Reach In Coolers, Refrigerated Display Cases, Telecom, Transportation, Wind Turbine.
Features and Benefits
- Blue self-supporting rigid polyester fiber w/proprietary binder
- Avg. Arrestance efficiency - 1/2”: 70%; 1”: 80%
- Dust Holding Capacity 343 gm.
- Initial air flow resistance - 1/2” 0.03 in. w.g.@1200 cfm; 1”: 0.07 in. w.g.@1200 cfm
- UL Classified as to Flammability Only
- Self Extinguishing -- FMVSS 302 Certified
- Available in 1/2” or 1” nominal thickness
- Maximum operating temperature 200°F (use at 200°F can cause softening, prolonged use can cause media to become brittle)
Media Types
- PermaFlo Gray Rigid Polyester contains an antimicrobial additive to inhibit the growth of bacteria, fungi, mold spores, mildew and other contaminants that can be created in environments with constant humidity and moisture. Available in services rolls.
- PermaFlo Blue Rigid Polyester is available in precut pads for quick change-outs and cut-to-fit service rolls.
- PermaFlo Green Rigid Polyester has a MERV rating of 8 and is available in cut-to-fit service rolls.
How to clean your PermaFlo filter
When using water, start by backwashing the filter so that the dirt load on the opposite side can wash out better. Keep the dirty side facing down when placed in a sink, on the ground or grate.
Once all dirt is washed out, wait for the filter to dry. Do not use soap, only use water. Do not twist or fold the filter to drain. The media will not absorb moisture, which makes it easy to clean and dry quickly.
Another alternative is to use a shop-vacuum to clean both sides of the filter.
Stabilizing Frame For Any Filter Media
Galvanized steel metal pad stabilizing frames with an enlarged metal support grid on one side are offered. This can be utilized in air filtration applications that need changing out media pads. The air filter media is held in place by two criss-crossed wire supports, which are available with or without the filter frame.
Contact Us for a quote.
Features and Benefits
- Standard or custom sizes available
- Available in 1/2", 1" or 2" thicknesses
- Five-year warranty
Model Types
- Model STAB is constructed of .02 gauge galvanized steel
- Model STABHD is constructed of heavy-duty 24 gauge galvanized steel
[ITEMPRICE]