Permatron equivalent replacement filter kit for Honeywell TrueFRESH™ VNT5070H1000 ERV & VNT5070E1000 HRV fresh air ventilation systems. We measure each filter to be 9 x 10 x 1/2 inches.
Features
- MERV 5 Rating
- Blue self-supporting rigid polyester fiber w/proprietary binder
- Avg. Arrestance efficiency: 70%;
- Dust Holding Capacity 343 gm.
- Initial air flow resistance 0.03 in. w.g.@1200 cfm
- Maximum operating temperature 200°F
Replacement Filter Selection
Instructions
STEP 1: Disconnect the power supply
STEP 2: Unlatch the door panel
STEP 3: Remove door panel by sliding it off the hinges
STEP 4: Remove the filters and vacuum if not replacing filters STEP 5:
HRV MODEL: Once a year or as needed, slide our the heat recovery core. Vacuum the four surfaces, let soak on warm water for 15 minutes, then spray rinse and let dry.
ERV MODEL: Once a year or as needed, slide our the heat recovery core. Vacuum the four surfaces, let soak on warm water for 15 minutes, then spray rinse and let dry.
STEP 6: Once a year or as needed, clean the interior of the unit (walls and drain pan) with a mild non-abrasive soap. It is recommended to use products are environmentally friendly.
STEP 7: Replace Core
STEP 8: Replace and dispose of the old filter in accordance to your municipal guidelines.
STEP 9: Reinstall and latch door panel.
STEP 10: Connect the power supply.
Permatron Permaflo blue media are made in Illinois. This self-supporting rigid blue polyester fiber air filter is a product of the USA.
|
 |
[ITEMPRICE]