|
|
|
|
 |
 |
|
Genuine FC200E1037 Honeywell media filter. Replacement filter for models F200E, F100F, F35F, F25A. Measured 20 x 24¾ x 4½ inch. ASHRAE rated MERV 13.
Replaces 203720 used in F25F1026.
Replaces FC35A1027 used in F35F1024. |
 |
|
HONEYWELL PRODUCT SPECIFICATIONS |
| Description |
20 x 25 Charged-Media Filter |
| Application |
Replacement Filter FC200E1037 |
| Dimensions |
20 x 25 in. (508 mm x 635 mm) |
| Efficiency Standard |
Efficiency ratings based on ASHRAE Standard 52.2-1999. |
| Efficiency Standard |
Efficiency ranges are defined for:
Small particles, E1=0.3 to 1.0 microns,
Medium particles, E2=1.0 to 3.0 microns,
Large particles, E3=3.0 to 10.0 microns. |
| Fractional Efficiency |
E1=63%, E2=90%, E3=97% |
| Minimum Efficiency Reporting Value (Media Filters Only) |
MERV 13 |
| Static Pressure Drop (in. w.c.) |
0.28 at 500 FPM |
| Type or Air Cleaner |
Media Air Cleaner |
The FC200E1037
Is
Used In |
F100F2010, F150E1034
F100B1032, F100F1038 |
|
|
 |
|
|
 |
 |
 |
The F200 steel frame can be upgraded to the F300E1035 electronic air cleaner. The frame has knock-outs to accommodate the F300E power box. The F200 frame is the same as the F300 frame, allowing the cells, prefilters and postfilters slide in to the F200 frame. The F200 frame is the same as the F100 frame.
Purchase the F300E1035 and move the components to your existing frame.
The F300 cells, prefilters, and postfilters slide in to the F100 or F200 frame, replacing the FC200E1037.
The photo below shows the F100 or F200 frame. The frame has knock-outs that allow the cell contacts to protrude through. Remove the knock-outs to install the F300 power box. The power box simply mounts with two screws and has a 5ft cord that plugs in to a standard 120v outlet.
|
 |
|
 |
|
 |
 |
Honeywell uses the same chassis for the F100, F200, and F300. The chassis is made in four sizes 16x20, 16x25, 20x20, 20x25. They all accept the same media filters or can be fitted with electronic cells.
The F100 is the basic model that comes with a filter rated at Merv 10. The F100 is available with or without the W8600A wall mount indicator that simply provides a reminder to change the filter based on calendar days. The F100 filter will also fit in the F200.
The F200 model uses the same chassis as the F100 but the access door has a sensor. The F200 door senses the pressure drop across the filter and transmits the status to the W8600B wall mount indicator. The W8600B will indicate a filter change is needed based on the differential pressure drop. The F200 comes with a filter rated at Merv 13 (FC200E1003). The F200 filter will also fit the F100 model.
The earlier model F35F and F25F also used the same chassis and door as the F100. The F25 and F35 used the current F100 or F200 replacement filters. |
 |
 |
|
|
|
|
|
|