|
|
|
|
 |
 |
|
Includes the steel cabinet, access door, pleated Merv 10 media filter FC100A1029, and W8600A AirWatch Indicator. The AirWatch Indicator includes 2 alkaline batteries (AAA). Everything shown in the photos is included. Installation requires connecting the duct and mounting the wall mount indicator. |
 |
|
The W8600A AirWatch indicates a filter change based
on a simple timer. The timer can be set for 3, 6, 9, or 12 months. When replacing the filter you need to press the reset button on the AirWatch.
The AirWatch also has an indicator for a humidifier and UV lamps. The humidifier and UV is a simple once a year reminder and can be disabled.
The F100 does not require electrical wiring. The F100 requires no maintenance except for replacing the filter and battery.
Rugged zinc-coated, roll-formed cabinet resists corrosion and can support the weight of a residential furnace and evaporator coil. Mounts in any position. This F100A steel frame is upgradeable to the F300E electronic air cleaner. See section below for more info.
Fractional Efficiency E1=25%, E2=62%, E3=85%
Static Pressure Drop 0.23 wc at 500 FPM
Airflow Maximum Capacity 1400 CFM
Replacement filter FC100A1029 or FC200E1029
|
 |
|
|
 |
 |
 |
Honeywell uses the same chassis for the F100, F200, and F300. The chassis is made in four sizes 16x20, 16x25, 20x20, 20x25. They all accept the same media filters or can be fitted with electronic cells.
The F100 is the basic model that comes with a filter rated at Merv 10. The F100A includes the W8600A wall mount indicator that simply provides a reminder to change the filter based on calendar days. The F100B does not include the W8600A. The F100 filter will also fit in the F200.
The F200 model uses the same chassis as the F100 but the access door has a sensor. The F200 door senses the pressure drop across the filter and transmits the status to the W8600B wall mount indicator. The W8600B will indicate a filter change is needed based on the differential pressure drop. The F200 comes with a filter rated at Merv 13. The F200 filter will also fit the F100 model.
The earlier model F35F and F25F also used the same chassis and door as the F100. The F25 and F35 used the current F100 or F200 replacement filters. |
 |
 |
 |
 |
The F200 steel frame can be upgraded to the F300E1019 electronic air cleaner. The frame has knock-outs to accommodate the F300E power box. The F200 frame is the same as the F300 frame, allowing the cells, prefilters and postfilters slide in to the F200 frame. The F200 frame is the same as the F100 frame.
Purchase the F300E1019 and move the components to your existing frame.
The F300 cells, prefilters, and postfilters slide in to the F100 or F200 frame.
The photo below shows the F100 or F200 frame. The frame has knock-outs that allow the cell contacts to protrude through. Remove the knock-outs to install the F300 power box. The power box simply mounts with two screws and has a 5ft cord that plugs in to a standard 120v outlet.
|
 |
|
 |
|
|
|
|
|
|
|